Joystick Parts There are 45 products.

Joystick Parts

Need to change something on your joystick or jst want some spare parts?

  • AT-187
    Available

    AT-187

    .187" (4.8mm) open barrel terminals. These are used on joysticks that lack the 5-pin connector (LS-32, LS-34, LS-55. LS-56, LS-58, LS-60). You will need some kind of tool to crimp these like the Hozan tool we sell, P-706.Price/pcs. 

    .187" (4.8mm) open barrel terminals. These are used on joysticks that lack the 5-pin...

    .187" (4.8mm) open barrel terminals. These are used on joysticks that lack the 5-pin connector (LS-32, LS-34, LS-55. LS-56, LS-58, LS-60). You will need some kind of tool to...

    20 ¥

    Add to cart View
  • Available

    Dust Cover

    These dust covers are sold in many colors and will fit the following joysticks:LS-34/LS-34-01, LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    These dust covers are sold in many colors and will fit the following...

    These dust covers are sold in many colors and will fit the following joysticks:LS-34/LS-34-01, LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    60 ¥

    View
  • Available

    Dust Covers - Clear

    These dust covers are sold in many colors and will fit the following joysticks:LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    These dust covers are sold in many colors and will fit the following...

    These dust covers are sold in many colors and will fit the following joysticks:LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    60 ¥

    View
  • GT-Y
    Available

    GT-Y

    Octagonal restrictor for Sanwa JLF-joystick. If rotational motions seem tricky to perform with a square restrictor give one of these a try.

    Octagonal restrictor for Sanwa JLF-joystick. If rotational motions seem tricky to...

    Octagonal restrictor for Sanwa JLF-joystick. If rotational motions seem tricky to perform with a square restrictor give one of these a try.

    550 ¥

    Add to cart View
  • H5P Harness
    Available

    H5P Harness

    Replacement 5-pin universal joystick cable for any "-01" submodel joystick from Seimitsu. Also compatible with the Sanwa JLF (any model) as a lower cost alternative to JLF-H.

    Replacement 5-pin universal joystick cable for any "-01" submodel joystick from...

    Replacement 5-pin universal joystick cable for any "-01" submodel joystick from Seimitsu. Also compatible with the Sanwa JLF (any model) as a lower cost alternative to JLF-H.

    290 ¥

    Add to cart View
  • Available

    JLF-CD-C

    Clear replacement shaft cover for Sanwa JLF joystick.Includes dust cover in matching color.

    Clear replacement shaft cover for Sanwa JLF joystick.Includes dust cover in matching...

    Clear replacement shaft cover for Sanwa JLF joystick.Includes dust cover in matching color.

    160 ¥

    View
  • JLF-H
    Available

    JLF-H

    5-pin universal joystick cable for Sanwa JLF-joystick. Typically, you will want one for each joystick you plan to install. Also compatible with any -01 submodel joystick from Seimitsu.

    5-pin universal joystick cable for Sanwa JLF-joystick. Typically, you will want one for...

    5-pin universal joystick cable for Sanwa JLF-joystick. Typically, you will want one for each joystick you plan to install. Also compatible with any -01 submodel joystick from...

    650 ¥

    Add to cart View
  • JLF-P-1 Mounting plate
    Available

    JLF-P-1

    Flat mountingplate for Sanwa JLF-joysticks. Make sure you also order screws and nuts (JLF-Spare-Parts).

    Flat mountingplate for Sanwa JLF-joysticks. Make sure you also order screws and nuts...

    Flat mountingplate for Sanwa JLF-joysticks. Make sure you also order screws and nuts (JLF-Spare-Parts).

    490 ¥

    Add to cart View
  • JLF-P-1S Mounting plate
    Available

    JLF-P-1S

    "S"-shaped Flat mountingplate for Sanwa JLF-joysticks. Make sure you also order screws and nuts (JLF-Spare-Parts).

    "S"-shaped Flat mountingplate for Sanwa JLF-joysticks. Make sure you also order screws...

    "S"-shaped Flat mountingplate for Sanwa JLF-joysticks. Make sure you also order screws and nuts (JLF-Spare-Parts).

    490 ¥

    Add to cart View
  • Available

    JLF-Spare Parts

    Need spare parts for your Sanwa JLF joystick? Everything from restrictor plates to springs, microswitches, shafts et.c. is here.

    Need spare parts for your Sanwa JLF joystick? Everything from restrictor plates to...

    Need spare parts for your Sanwa JLF joystick? Everything from restrictor plates to springs, microswitches, shafts et.c. is here.

    550 ¥

    View
  • JLHS-Flash 1
    Out of stock

    JLHS Flash1 PCB

    Replacement PCB for Sanwa JLF joystick (and version). This PCB has no moving parts like the TP-MA, it is optical and runs on 5 Volts (cable included). Yellow dust cover also included.

    Replacement PCB for Sanwa JLF joystick (and version). This PCB has no moving parts like...

    Replacement PCB for Sanwa JLF joystick (and version). This PCB has no moving parts like the TP-MA, it is optical and runs on 5 Volts (cable included). Yellow dust cover also...

    2 995 ¥

    Add to cart View
  • Available

    LB-30

    Mini balltop from Seimitsu.Diameter: 30mm.

    Mini balltop from Seimitsu.Diameter: 30mm.

    Mini balltop from Seimitsu.Diameter: 30mm.

    125 ¥

    View
  • Available

    LB-30N

    American style bat handle, fits any Sanwa or Seimitsu joystick. If you cannot get used to balltops but like the feel of Japanese joysticks here is your solution.Joystick adapter included. 

    American style bat handle, fits any Sanwa or Seimitsu joystick. If you cannot get used...

    American style bat handle, fits any Sanwa or Seimitsu joystick. If you cannot get used to balltops but like the feel of Japanese joysticks here is your solution.Joystick adapter...

    295 ¥

    View
  • LB-30N-CW
    Available

    LB-30N-CW

    American style bat handle, fits any Sanwa or Seimitsu joystick. If you cannot get used to balltops but like the feel of Japanese joysticks here is your solution.Comes without joystick adapter (no need for it on this model) and clear color only!

    American style bat handle, fits any Sanwa or Seimitsu joystick. If you cannot get used...

    American style bat handle, fits any Sanwa or Seimitsu joystick. If you cannot get used to balltops but like the feel of Japanese joysticks here is your solution.Comes without...

    495 ¥

    Add to cart View
  • Available

    LB-35

    Standard size balltop from Sanwa, included with all their joysticks. Every balltop can be fitted onto any model of joystick regardless of manufacturer. If you require matching colors though, be sure to get a balltop from the same source as your buttons.Diameter: 35mm.

    Standard size balltop from Sanwa, included with all their joysticks. Every balltop can...

    Standard size balltop from Sanwa, included with all their joysticks. Every balltop can be fitted onto any model of joystick regardless of manufacturer. If you require matching...

    180 ¥

    View
  • LB-35
    Available

    LB-35

    Standard size balltop from Seimitsu, included with all their joysticks. Diameter: 35mm.We have some special colors left in stock as well, get them before they are sold out (Navy, Deep Pink, Jungle Green and Turquoise)! 

    Standard size balltop from Seimitsu, included with all their joysticks. Diameter:...

    Standard size balltop from Seimitsu, included with all their joysticks. Diameter: 35mm.We have some special colors left in stock as well, get them before they are sold out...

    125 ¥

    View
  • Available

    LB-35-Keikou

    LIMITED PRODUCTION STANDARD SIZE BALLTOP FROM SEIMITSU THAT COMES IN FOUR COLOR OPTIONS (FLUORESCENSE). DIAMETER: 35MM.

    LIMITED PRODUCTION STANDARD SIZE BALLTOP FROM SEIMITSU THAT COMES IN FOUR COLOR OPTIONS...

    LIMITED PRODUCTION STANDARD SIZE BALLTOP FROM SEIMITSU THAT COMES IN FOUR COLOR OPTIONS (FLUORESCENSE). DIAMETER: 35MM.

    160 ¥

    View
  • Available

    LB-39

    Also known as a bubble ball, this balltop is clear with visible bubbles inside. Contrary to their product code these are the same size as LB-35.Diameter: 35mm.

    Also known as a bubble ball, this balltop is clear with visible bubbles inside....

    Also known as a bubble ball, this balltop is clear with visible bubbles inside. Contrary to their product code these are the same size as LB-35.Diameter: 35mm.

    220 ¥

    View
  • Available

    LB-49

    Also known as a bubble ball, this balltop is clear with visible bubbles inside.Diameter: 45mm.

    Also known as a bubble ball, this balltop is clear with visible bubbles...

    Also known as a bubble ball, this balltop is clear with visible bubbles inside.Diameter: 45mm.

    480 ¥

    View
  • Joystick Adapter
    Available

    LB-I

    Adapter for joysticks that normally use 30mm and 35mm balltops to be able to use balltops with a bigger hole (Sanwa battops).

    Adapter for joysticks that normally use 30mm and 35mm balltops to be able to use...

    Adapter for joysticks that normally use 30mm and 35mm balltops to be able to use balltops with a bigger hole (Sanwa battops).

    110 ¥

    Add to cart View
  • LS-32 Extension
    Available

    LS-32 Extension

    This is an extension that you screw on the shaft to make it longer.Works on Seimitsu LS-32/LS-32-01. 

    This is an extension that you screw on the shaft to make it longer.Works on Seimitsu...

    This is an extension that you screw on the shaft to make it longer.Works on Seimitsu LS-32/LS-32-01. 

    125 ¥

    Add to cart View
  • LS-32 Round Gate
    Available

    LS-32 Round Gate

    This guide (restrictor) turns your LS-32/LS-32-01, LS-34/LS-34-01 into a round motion.

    This guide (restrictor) turns your LS-32/LS-32-01, LS-34/LS-34-01 into a round motion.

    This guide (restrictor) turns your LS-32/LS-32-01, LS-34/LS-34-01 into a round motion.

    160 ¥

    Add to cart View
  • Available

    LS-32-01-Spare parts

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    990 ¥

    View
  • Available

    LS-32-Spare parts

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    350 ¥

    View
  • LS-33 Spring
    Available

    LS-33 Spring

    Since Seimitsu stopped selling the LS-33 joystick we only offer the spring until supply ends.

    Since Seimitsu stopped selling the LS-33 joystick we only offer the spring until supply...

    Since Seimitsu stopped selling the LS-33 joystick we only offer the spring until supply ends.

    85 ¥

    Add to cart View
  • Available

    LS-40-01-Spare parts

    Need to change some parts on your LS-40/LS-40-01 joystick? Shaft, springs, guide et.c is here.

    Need to change some parts on your LS-40/LS-40-01 joystick? Shaft, springs, guide et.c...

    Need to change some parts on your LS-40/LS-40-01 joystick? Shaft, springs, guide et.c is here.

    210 ¥

    View
  • Available

    LS-40-Spare parts

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    210 ¥

    View
  • Available

    LS-55-01-Spare parts

    Need to change some parts on your LS-55/LS-55-01joystick? Shaft, springs, guide et.c is here.

    Need to change some parts on your LS-55/LS-55-01joystick? Shaft, springs, guide et.c is...

    Need to change some parts on your LS-55/LS-55-01joystick? Shaft, springs, guide et.c is here.

    990 ¥

    View
  • Available

    LS-55-Spare parts

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    350 ¥

    View
  • LS-56 Round Gate
    Available

    LS-56 Round Gate

    This guide (restrictor) makes your joystick turn in a octagonal/round motion.It works on: LS-55/LS-55-01,  LS-56/LS-56-01, LS-58/LS-58-01, LS-60.

    This guide (restrictor) makes your joystick turn in a octagonal/round motion.It works...

    This guide (restrictor) makes your joystick turn in a octagonal/round motion.It works on: LS-55/LS-55-01,  LS-56/LS-56-01, LS-58/LS-58-01, LS-60.

    180 ¥

    Add to cart View
  • Available

    LS-56-01-Spare parts

    Need to change some parts on your LS-56/LS-56-01 (LS-58/LS-58-01) joystick? Shaft, springs, guide et.c is all here.

    Need to change some parts on your LS-56/LS-56-01 (LS-58/LS-58-01) joystick? Shaft,...

    Need to change some parts on your LS-56/LS-56-01 (LS-58/LS-58-01) joystick? Shaft, springs, guide et.c is all here.

    45 ¥

    View
  • Available

    LS-56-Spare parts

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    Need to change some parts on your joystick? Shaft, springs, guide et.c. is here.

    350 ¥

    View
  • LS-60 Spring
    Available

    LS-60 Spring

    Seimitsu has it´s newest joystick spring for sale, get it now!Fits: LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Seimitsu has it´s newest joystick spring for sale, get it now!Fits: LS-56/LS-56-01,...

    Seimitsu has it´s newest joystick spring for sale, get it now!Fits: LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    90 ¥

    Add to cart View
  • MS-Mounting Plate
    Available

    MS-Mounting-Plate

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    290 ¥

    Add to cart View
  • MS-O-3R
    Available

    MS-O-3R

    Microswitch for jlf-joysticks.

    Microswitch for jlf-joysticks.

    Microswitch for jlf-joysticks.

    220 ¥

    Add to cart View
  • Optical Joystick
    Out of stock

    Optical PCB Kit

    Optical joystick from GamerFinger (5 Volt needed). For use with the Sanwa JLF-joystick.Comes with:1 x 6-pin cable (to hook it up to your controller pcb).1 x Foam Tab (to make it more steady).1 x Copper Ring (for extra tension of the spring).1 x 5-pin connector (optional use).More information with pictures coming soon...

    Optical joystick from GamerFinger (5 Volt needed). For use with the Sanwa...

    Optical joystick from GamerFinger (5 Volt needed). For use with the Sanwa JLF-joystick.Comes with:1 x 6-pin cable (to hook it up to your controller pcb).1 x Foam Tab (to make it...

    3 495 ¥

    Add to cart View
  • SE-Mounting Plate
    Available

    SE-Mounting Plate

    Flat mountingplate for Seimitsu LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.

    Flat mountingplate for Seimitsu LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.

    Flat mountingplate for Seimitsu LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.

    290 ¥

    Add to cart View
  • SE-P40-Mounting Plate
    Available

    SE-P40-Mounting Plate

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    290 ¥

    Add to cart View
  • Available

    Shaft Cover

    These shaft covers are sold in many colors and will fit the following joysticks:LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    These shaft covers are sold in many colors and will fit the following...

    These shaft covers are sold in many colors and will fit the following joysticks:LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    110 ¥

    View
  • Available

    Shaft Cover - Clear

    These shaft covers are sold in many colors and will fit the following joysticks:LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    These shaft covers are sold in many colors and will fit the following...

    These shaft covers are sold in many colors and will fit the following joysticks:LS-40/LS-40-01,  LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01, LS-60/LS-60-01.

    110 ¥

    View
  • SR-187
    Available

    SR-187

    Plastic leeves for AT-187 open barrel terminals. "Snap-on".Price/pcs. 

    Plastic leeves for AT-187 open barrel terminals. "Snap-on".Price/pcs. 

    Plastic leeves for AT-187 open barrel terminals. "Snap-on".Price/pcs. 

    20 ¥

    Add to cart View
  • SS-Mounting Plate
    Available

    SS-Mounting Plate

    "S"-shaped mountingplate for Seimitsu LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.

    "S"-shaped mountingplate for Seimitsu LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.

    "S"-shaped mountingplate for Seimitsu LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.

    350 ¥

    Add to cart View
  • SS-P40-Mounting Plate
    Available

    SS-P40-Mounting Plate

    "S"-shaped mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    "S"-shaped mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01...

    "S"-shaped mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    350 ¥

    Add to cart View
  • TP-MA
    Available

    TP-MA

    Replacement PCB for Sanwa JLF-joysticks. No point in replacing the entire joystick if just some of the microswitches have worn out.

    Replacement PCB for Sanwa JLF-joysticks. No point in replacing the entire joystick if...

    Replacement PCB for Sanwa JLF-joysticks. No point in replacing the entire joystick if just some of the microswitches have worn out.

    1 150 ¥

    Add to cart View
  • VF-Mounting Plate
    Available

    VF-Mounting Plate

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    Flat mountingplate for Seimitsu LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60.

    290 ¥

    Add to cart View